Climate Control Panel died

X300
21

Hold headlamp flash stalk back, Turn ignition key to position II, Flash headlamps 4 times (5 times for 1997 X100).

Security light will flash and security sounder will ‘chirp’. (if sounder is enabled)

You are now in LEARNING MODE.

Press any button on a remote you wish to configure. (up to 5)

Turn key off or let the system ‘time-out’.

22

Thanks, Motor … :smile: (20)

23

If you have more than 1 fob, you need to press buttons on both, so press a button 3 times on the first fob, then twice on the second. If you have 3 fobs, you do 3 presses on the first, 1 on the second and 1 on the third. You have to do 5 presses in total.

24

To close out this topic:
The board of my Climate Control computer

image
image1920×2560 330 KB

image
image1920×2560 383 KB

(LNA7600AC Denso) was burnt out. See image.
Replaced it with a LNA7600AF Denso, and works fine.

1 Like