Hi Everyone,
I’m working on a custom cooling system for another Jag I’m building and would like to use a fan shroud from a 4L XJS because the fans offset makes it looks like it might work well for this car. I don’t have one so I’m going by internet/ebay pics. Before I pull the trigger and get one, can someone please tell me the important dimensions shown in the pic below?
Also what diameter is the original fan?
Thanks!
~Mike
84 XJS
85 XJ6
73 XJ6
72 XJ6 (x2)
60 Mk2
I have one not doing anything.
Want it?
Call @ 650.455.1110
Hi - I might want it but I’m not entirely positive it will work. Since you have one off the car could you possibly measure it for me?
Thanks.
~Mike
Stephen D’Angelo
1107 Galvez Drive
Pacifica CA 94044 650.455.1110
August 20
Hi - I might want it but I’m not entirely positive it will work. Since you have one off the car could you possibly measure it for me?
Thanks.
~Mike
Hi Stephen - it looks like your post is missing something my friend. It’s just your name and address… Were you intending to send measurement?
~Mike
Mike,
I’m Sorry, I thought I did but it must have been deleted.
I went back into my sent folder and found this.
The overall depth is 3 1/2", Width is 28", Height is 19" and the inside diameter is 19"
All the rubber flaps are in good condition.
Minor surface rust.
Thanks Stephen - will call you tomorrow.
~Mike
1107 Galvez Drive
Pacifica CA 94044 650.455.1110
Mike
I found the perfect carton for the shroud.
The only thing I need now is a address zip code to get you a quote.
Stephen D’Angelo
Stephen D’Angelo
1107 Galvez Drive
Pacifica CA 94044 650.455.1110
Mike,
I am currently having problems with my email.
Some mail is being locked up in the spam folder and is not readable.
I tried to let you know I found a perfect carton. (see below)
Please call so I know weather to save the shroud.
Hi Stephen - Sorry for the delay. I responded in your Jag-Lovers messages.
~Mike