F-Type Front Bumper Removal and Grille Maintenance DIY

Deleted by request of the moderators.

2 Likes

You mention the use of a 5/16” socket. Is the F not a metric vehicle ?
Nice write up, thanks for sharing.

5/16” is virtually identical to 8 mm.

Yes I’m sure you are right that 8mm is the correct socket size.

This seems to be the only diy I can find on this online, it even gets praise as a good write up. Why would the moderators ask for it to be removed. If the OP could PM me with any pointers I’d appreciate it.

You won’t hear from him for another 999 years and for good reason, but I‘m sure someone can tell you.

David

Oh dear, sounds like forum drama. I just wanted a jump start on getting the bumper off, guess I’ll do it the old fashioned way.