Changing the rubber will not but yes, re-bonding of course will do.
Problem is that there was not enough glue from the factory leaving water trap voids under the screens.
The seals under the screens can be reused if the make it through the removal process.
They will have a much better chance of survival if are able to remove them before you start cutting the glue.
Also make sure you glue them to the frame before, it will help immensely, otherwise it will be no fun when they decide to depart at the most critical moment.
Mind you front and rear are different.
Are you doing it your self?
If so don’t try to do it all at once, it will be impossible, ask me how I know… Do it in two steps, the glass first, the chrome trim second.
I chose not to use the outer seals but use silicone instead.
Looks nicer, much better sealing but a very difficult job. (scroll down the thread)
Also this might help:
The biggest pain in the ass ever indeed…