[Saloon-lovers] Bootlid badge layout for a 58 Mk1 3.4 auto

My Mk1 was restored by the previous owner but has no boot
badges. I have three new badges to fit but I don’t know the
position and layout. Would anyone have a photo I could work
from? Probably some dimensions would be better? Say from a
reference point from the top of the lid, down?
Thanks–
pd56
–Posted using Jag-lovers JagFORUM [forums.jag-lovers.org]–

[Commercial use of subscribers e-mail addresses prohibited.]

To remove yourself from this list, go to


// list policy dictates that messages be trimmed

Hi Paul,

The first step would be to look for the original holes above the reverse
light. Check the inside of the boot lid for tell-tale bondo worms that have
been extruded through the holes.

Mike Eck
New Jersey, USA
www.jaguarclock.com
'51 XK120 OTS, '62 3.8 MK2 MOD, '72 SIII E-Type 2+2

My Mk1 was restored by the previous owner but has no boot
badges. I have three new badges to fit but I don’t know the
position and layout. Would anyone have a photo I could work
from? Probably some dimensions would be better? Say from a
reference point from the top of the lid, down?
Thanks

pd56

[Commercial use of subscribers e-mail addresses prohibited.]==============================
To remove yourself from this list, go to


// list policy dictates that messages be trimmed