[Saloon-lovers] Mark II boot floor panels

Well, it’s time to stop fiddling around and get to grips
with the dread tin worm that has made my boot floor on Basil
look like swiss cheese.

Basil is a 1967 340RHD, manual with OD and all three boot
floor panels are in pretty sorry shape–as is the spare tire
well. I know I can get the spare well from one of the
regulars, but what of the other panels?

Has anyone got a line on these or will I need my local metal
artisan make them from scratch? That’d take a while as he’s
doing about 40% of the panels on a 330SWB Ferrari right now
and my stuff would be quite low on his priority list.–
TheRickster ('70 SII E-Type OTS LHD, '67 340 RHD)
–Posted using Jag-lovers JagFORUM [forums.jag-lovers.org]–

[Commercial use of subscribers e-mail addresses prohibited.]

To remove yourself from this list, go to


// list policy dictates that messages be trimmed

In reply to a message from TheRickster sent Fri 25 May 2012:

Hi,

Try Martin Robey in the UK. They have been pressing replacement Jag
parts for years. You can check it out on line.

Regards, Rob–
The original message included these comments:

Has anyone got a line on these or will I need my local metal


Gumnuts: 2 x E’s, Mk2, S type, XJ Ser 2 & others
Perth, Australia
–Posted using Jag-lovers JagFORUM [forums.jag-lovers.org]–
–Support Jag-lovers - Donate at http://www.jag-lovers.org/donate04.php

[Commercial use of subscribers e-mail addresses prohibited.]

To remove yourself from this list, go to


// list policy dictates that messages be trimmed