[Saloon-lovers] Pulling the axles

Hi Fellow Listers: Looks like I have to pull the rear axles on my Mark 2 as
the threads were buggered up in my horrible attempt at pulling the hubs.
My machine shop friend says he can easily realign threads if I can get the
axles to him.
In reading the information, removal looks pretty straight forward, but I am
not certain what tool to use at the method is a little different than the hub
removal was.
Any tips would be appreciated.

Thank so much
Dennis Barr

[Commercial use of subscribers e-mail addresses prohibited.]==============================
To remove yourself from this list, go to