SS100 Rear Engine Bracket Designs

Pre-XK
1

Has any one got a drawing for the rear engine backets for an SS100. I took out the old Jaguar 3.5 engine out to install the a M SS 3.5L and the holes are 20.5" apart and not 19.5" as per the chassis drawing.
Also the profile of the front brackets would be useful

2

Here is the only picture I could find on SSJaguar.collectordata.com.

49026b
49026b1920×1280 300 KB

3

Rob,

Thank you.

Lucky John Clucus had a design he used for this 3.5 L SS100, which I have now printed and making copies.

Screen Shot 2021-01-31 at 12.54.21 pm.png
Screen Shot 2021-01-31 at 12.54.21 pm.png1280×458 535 KB

Andrew (Sam) Smith
Jaguar SS100 Project
0418 592 499
2 Benson St Emerald
Victoria
Australia 3782
ASmith@Cracks.net.au