sbobev
(Steve)
February 19, 2018, 7:07pm
8
Kirbert:
There are two on the distributor: One that goes to a small inline filter that’s open on the other end and serves as an air intake, and is simply laid somewhere on the LH side of the engine compartment. The other goes to a tap into the elbow that goes between the inboard panel of the LH engine air filter housing and the AAV.
We seem to cover this topic frequently, but pictures are very hard to come by.
I had some in the old photo-albums but they are now useless. Perhaps this:
This is Dave’s (540itouring) online album.
http://tinyurl.com/ckybyx2
Picture #19 shows the tubing that provides the suction. Not
on focus but you see the AAV house to the airbox and the
little white plastic connector. Make sure yours is
connected there and not just hanging
Picture #20 shows the tubing in its entire length
Any tubing will do it.