[x300] Garage Door Receiver 635LM

X300
1

Anyone had any luck with using a LiftMaster Sears Craftsman Garage
Door Receiver 635LM to add Homelink functionality to a garage door
opener? It looks like it might be compatible with the homelink in a
96 but the company selling it say the car needs to be Security+
compatible too. I can’t find any reference to Security+.

Thanks–
Mike
Vero Beach, Florida, United States
–Posted using Jag-lovers JagFORUM [forums.jag-lovers.org]–

2

In reply to a message from Mkez1 sent Sat 11 Nov 2006:

Mike,
I’m not sure about that number, but in general, the built-in garage
door openers in the x-300’s will not read the rolling codes in
newer systems that most homes have now. The x-308’s will read them.
Bill–
The original message included these comments:

Anyone had any luck with using a LiftMaster Sears Craftsman Garage
Door Receiver 635LM to add Homelink functionality to a garage door
opener? It looks like it might be compatible with the homelink in a
96 but the company selling it say the car needs to be Security+
compatible too. I can’t find any reference to Security+.

–
Bill Cooper, 2000 VDP, 1992 XJS V12, 1985 XJ6 Sov., 1995 XJR
Charlotte, NC, United States
–Posted using Jag-lovers JagFORUM [forums.jag-lovers.org]–
–Support Jag-lovers - Donate at http://www.jag-lovers.org/donate04.php –

3

In reply to a message from drbill sent Sun 12 Nov 2006:

I keep wondering myself if it could be changed the original
receiver from our cars with a Sears or other brand rolling code
receiver?–
95’XJ6 VDP 4.0L, Flamenco Red, San Pedro California
–Posted using Jag-lovers JagFORUM [forums.jag-lovers.org]–
–Support Jag-lovers - Donate at http://www.jag-lovers.org/donate04.php –

4

Mike,

It works just fine, I’ve been using one for about a year with no problems.
To be clear: the 635LM is a second receiver you attach to your existing
receiver. The 635LM receiver can be programmed (or more accurately the car’s
transmitter) to work with the existing opener, so you can use one of the
buttons in the car. However, this means a step back in terms of the rolling
code technology. From my research, the system in the car is a simple rolling
code system, not as sophisticated as the current generation.

Peter
'97 XJR
Yucca Valley, California-----Original Message-----
From: owner-x300@jag-lovers.org [mailto:owner-x300@jag-lovers.org] On Behalf
Of Mkez1
Sent: Saturday, November 11, 2006 12:08 PM
To: x300@jag-lovers.org
Subject: [x300] Garage Door Receiver 635LM

Anyone had any luck with using a LiftMaster Sears Craftsman Garage
Door Receiver 635LM to add Homelink functionality to a garage door
opener? It looks like it might be compatible with the homelink in a
96 but the company selling it say the car needs to be Security+
compatible too. I can’t find any reference to Security+.

Thanks

Mike
Vero Beach, Florida, United States
–Posted using Jag-lovers JagFORUM [forums.jag-lovers.org]–

5

In reply to a message from Mkez1 sent Sat 11 Nov 2006:

Hmm. Did anybody tried to fit a x308 garage door opener to a x300.
I have a dealer who sells jags in pieces. Maybe I can get on of
those if it fits…–
Crackwood
–Posted using Jag-lovers JagFORUM [forums.jag-lovers.org]–
–Support Jag-lovers - Donate at http://www.jag-lovers.org/donate04.php –

6

In reply to a message from Mkez1 sent Sat 11 Nov 2006:

Hmm. Did anybody tried to fit a x308 garage door opener to a x300.
I have a dealer who sells jags in pieces. Maybe I can get on of
those if it fits…–
Crackwood
–Posted using Jag-lovers JagFORUM [forums.jag-lovers.org]–
–Support Jag-lovers - Donate at http://www.jag-lovers.org/donate04.php –

7

In reply to a message from Peter M. Morris sent Sun 12 Nov 2006:

Thanks Peter. I’ll be ordering one today!–
Mike
Vero Beach, Florida, United States
–Posted using Jag-lovers JagFORUM [forums.jag-lovers.org]–
–Support Jag-lovers - Donate at http://www.jag-lovers.org/donate04.php –