In reply to a message from Jackdog1 sent Sat 10 Sep 2016:
Hi Richard,
I removed the drivers seat in my '94 last year and it was
pretty easy.
Just slide all the way forward and undo the to rear screws,
then slide all the way back and undo the two front. I found
the four nuts where captive/welded so there was no need to
pack anything in there to stop them rotating.
When you get the seat out it there was just one bolt either
side, which also double as the hinge pins to separate the
seat base from the back. And then unplug everything.
If you have the celebration seats with integrated headrest
that part may be different.
If you want to disconnect the runners from the seat base
that was just another four bolts but you’ll need a 12v
supply to power the runners forward and back to access those
four bolts once the seat is out of the car.
I had sourced a NOS seat base in doeskin so all I needed to
do was put it all back together in reverse and it gave the
seat a whole new life!–
1994 XJS 4.0 (AJ6) & 1964 Wolseley Hornet MKII
–Posted using Jag-lovers JagFORUM [forums.jag-lovers.org]–
–Support Jag-lovers - Donate at http://www.jag-lovers.org/donate04.php –
// please trim quoted text to context only