Need help! I took the old BW66 out of my XJ6-84 and I don’t
remember how the thing gets put back together (the mounting plate
that is). I have the basics but where do the spacers go (four) I
know the two that go between the plate and a rear bracket attached
to the plate, but where do the other two go? What about the round
metal washer where does that go? If anybody has a schematic I
would appreciate it. I don’t know if this washer goes inside the
spring or outside. I forgot to take notes as I disassembled and
learned my lesson to never rely on memory again.–
Arnaldo
–Posted using Jag-lovers JagFORUM [forums.jag-lovers.org]–
I’m sending you some photos of the rear trans mount off list. That should be
all you need.
Good luck,
Doug Ingram
Victoria BC Canada
1987 Jaguar Series III XJ6 VdP----- Original Message -----
From: “Arnaldo” ac7sgs@aol.com
To: xj@jag-lovers.org
Sent: Thursday, April 01, 2004 8:30 PM
Subject: [xj] Transmission mounting plate
Need help! I took the old BW66 out of my XJ6-84 and I don’t
remember how the thing gets put back together (the mounting plate
that is). I have the basics but where do the spacers go (four) I
know the two that go between the plate and a rear bracket attached
to the plate, but where do the other two go? What about the round
metal washer where does that go? If anybody has a schematic I
would appreciate it. I don’t know if this washer goes inside the
spring or outside. I forgot to take notes as I disassembled and
learned my lesson to never rely on memory again.
@Arnaldo@Doug_Ingram I am hoping either of you can send me over the schematics. I am in the same boat and have forgotten how to reinstall my transmission mounting plate. Greatly appreciated!