In reply to a message from Spartan2010 sent Mon 31 Aug 2015:
another attempt I made to document this connector here:
The pin-out is:
Pin 1 - Ground - Black
Pin 2 - Hi Beams - Blue/White
Pin 3 - Low Beams - Blue/Red
Pin 4 - Horns - Purple/Yellow (Series 1 only)
Pin 5 - Side Lamps - Red
Pin 6 - Fog Lights - Red/Yellow (optional)
Pin 7 - RH Flasher - Green/White
Pin 8 - LH Flasher - Green/Red–
The original message included these comments:
I am restoring my 1970 E Type and would appreciate it if someone
could send me a link or a photo with the wires connected to the 8
Pin connector for the bonnet. I am using all new harness, wiring
block and 8 pin connector. I also could use the wiring connecting
block. The wire diagram does not address the layout.
Thanks,
Fred
–
john carey : (888373) Bettie IV - my '63 S1 FHC
Los Gatos/California, United States
–Posted using Jag-lovers JagFORUM [forums.jag-lovers.org]–
Search the archives & forums - http://search.jag-lovers.org/
Subscription changes - http://www.jag-lovers.com/cgi-bin/majordomo
Support Jag-lovers - Donate at http://www.jag-lovers.org/donate04.php