In reply to a message from Mister Mitch sent Fri 24 Jul 2015:
Another one. When reassembling the subframe assembly you must
pre-fit the two upper/outer bolts and radiator support
brackets to the bonnet subframe (aka trapeze) before offering
it up to the picture frame and engine frames. If you otherwise
bolt the trapeze in place the two upper bolts will not clear
the tubes in the trapeze and you will need to disassemble and
start over again.–
Nick Saltarelli '68 Cdn mkt E-type S1� OTS, '54 XK120SE OTS
Niagara, Ontario, Canada
–Posted using Jag-lovers JagFORUM [forums.jag-lovers.org]–
Search the archives & forums - http://search.jag-lovers.org/
Subscription changes - http://www.jag-lovers.com/cgi-bin/majordomo
Support Jag-lovers - Donate at http://www.jag-lovers.org/donate04.php