[E-Type] Re: NAPA hose

Alas!
I removed the label from my lower hose and put it somewhere I’d be sure not
to lose it.
But I THINK I have the correct receipt from NAPA. If you are near a NAPA
store, look at their part number 7133. My receipt says it’s the NBH line;
list price $19.50; my cost $13.49. If its the correct hose, it’ll be obvious
as it eliminate the metal elbow and is a truly 3D monster. But it works great
Good Luck, Mike Moore
63 OTS S1 WIP

Gates part number 20145 works very well as a one piece lower radiator
hose on a 3.8L series one E type as well. I never had the right bits
and never used anything else.

Frank Filangeri…“Don’t always follow the crowd.
1962 E OTS Flat Floor…Nobody goes there anymore.
1966 AH 3000…It’s too crowded.” Yogi Berra

On Thu, 1 Feb 2001 20:25:22 EST MMoore8425@aol.com writes:> Alas!

I removed the label from my lower hose and put it somewhere I’d be
sure not
to lose it.
But I THINK I have the correct receipt from NAPA. If you are near a
NAPA
store, look at their part number 7133. My receipt says it’s the NBH
line;
list price $19.50; my cost $13.49. If its the correct hose, it’ll be
obvious
as it eliminate the metal elbow and is a truly 3D monster. But it
works great
Good Luck, Mike Moore
63 OTS S1 WIP


GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit:
http://dl.www.juno.com/get/tagj.