Horn button assy broken, how to fix?

[Rob_Reilly]

Click on this link.

Later XK 120 manette disassembly

Here is my Mark V manette. I think it is the same as most 120s with turn signals. Access hole rotates to remove 3 small flat head screws. [2020-03-26 22.13.44] All connection nuts are soldered. [2020-03-26 22.15.23] 2 round head long screws hold front to rear. One is soldered. [2020-03-26 22.16.43] Screws on horn button end are also soldered. [2020-03-26 22.18.24] Electronics repair places sell de-soldering tools, or you can get the solder to wick up onto a piece of stranded wire. Sol…