Looking for dimensions of the gearbox mount washer

[ysmalkie (Tadek)]

Hello,

A friend of mine is trying to fit the S3 auto gearbox into the car and is missing the C35666 washer (red circled on the drawing). Would anyone be able to take a photo of it and post the dimensions?

I would be much obliged.

Tadek

[Kirbert (Author of the Book, former owner of an '83 XJ-S H.E.)]

There’s a discussion of the tranny mount in the XJ-S with the GM400 transmission going on right now, including a couple of photos:

TH400 Pan Recommendations

Kirby, here are my parts. I have a spacer AND a thick part to the bolt. I guess the bushing slides that much. [IMG_20190916_174907695]

I’m not as familiar with the SIII mount, but it certainly seems to me a couple of parts are missing from that diagram. I suspect there should be two of the sleeve directly under the circled part. And between those two sleeves there probably should be a washer that’s kinda thick with rounded edges for sliding up and down within the rubber bushing C.30159.