Oil Pressure sender (again) -repair possible?

[Mike_Stone]

@John_Quilter

someone found a GM supplied oil pressure transmitter that would permit the gauge to read varying pressure

From the archives:

[xj40] Low Oil Pressure

In reply to a message from NickT sent Fri 24 Feb 2006: First, check that the wire is still connected to the sender. Mine came loose, and I just had to slide it on and off a couple of times to clean the contact before it started working. The sender is located on the left side of the engine (facing forward) just below the 2nd and 3rd cylinders from the front. I found that I could just squeeze my hand in below those two intake runners, feel the sender, and check the wire. I would not driv…