Where does the base of my throttle (gas) pedal go

Saloons
1

OK I know I asked this question before but I cannot find the response I have replaced the footwell on the drivers side of a Right Hand Drive MKII and I need to know the location of the holes on the floor for the throttle pedal, measurements from the sill and crossmember under the seat or some other good reference point can anyone out there help ?

Thanks

Jagvette

2

Here you go. Original floors. The bracket is hard up against the bevel of the toeboard. The offset from the inner sill is 120mm. Paul

15769032515683044873791486569002
157690325156830448737914865690021548×2064 1.25 MB

3

I measured my ‘S’ and the heel of the pedal is 570mm from the cross brace under the seat

4

Thank you so much you guys rock