[x300] Body Processor Module 1996 XJ6

X300
1

The module says it is programmable…anyone know how I do
this, so I can determine if it is faulty? Problem: the
functions it controls are not working, including key
cranking (it starts and runs fine when a remote starter is
used). Also cannot find the Security & Locking Control
Module, which is supposed to be in front left of trunk.
(Obviously I have electrical issues!) I have managed to get
a hold of the 55 page wiring diagram, as I now realise that
a workshop manual for this year is not yet available, or is
there one somewhere?–
laird 2
Prescott, AZ, United States
–Posted using Jag-lovers JagFORUM [forums.jag-lovers.org]–

2

Laird,

A workshop manual is available through the Jaguar Daimler Heritage Trust
(www.jdht.com under eShop). It’s scans of the factory service and parts
manuals and includes the wiring diagram.

“Mark 1” Mark Stephenson
'52 XK120 S673129, '59 Mk1, '84,'85,'86 &'95 XJ6-----Original Message-----
From: owner-x300@jag-lovers.org [mailto:owner-x300@jag-lovers.org] On Behalf
Of laird 2
Sent: Wednesday, October 17, 2007 3:11 AM
To: x300@jag-lovers.org
Subject: [x300] Body Processor Module 1996 XJ6

The module says it is programmable…anyone know how I do
this, so I can determine if it is faulty? Problem: the
functions it controls are not working, including key
cranking (it starts and runs fine when a remote starter is
used). Also cannot find the Security & Locking Control
Module, which is supposed to be in front left of trunk.
(Obviously I have electrical issues!) I have managed to get
a hold of the 55 page wiring diagram, as I now realise that
a workshop manual for this year is not yet available, or is
there one somewhere?

laird 2
Prescott, AZ, United States
–Posted using Jag-lovers JagFORUM [forums.jag-lovers.org]–

3

I know this was decades ago but did you ever resolve it, please? I have the exact same problem now in 2024. Regards, Bo Andersen

4

Hi Bo, I didn’t have the car too long after this, but the problem was fixed by purchasing a used module from ebay. Plugged it in, & everything worked.! That was a beaut of a car, I loved it. Even the Jag mechanics raved about it (although I couldn’t afford to let them service it!). Good luck.

5

Thanks. Was it the big ECM module under the passenger dash with the huge blue and yellow connectors?

6

It was under the passenger dash.

Yahoo Mail: Search, Organize, Conquer

7

“passenger” side could be left-hand or right-hand side :wink:

8

Correct. My X300 was a left hand drive USA vehicle. Therefore blah blah…!!

Yahoo Mail: Search, Organize, Conquer